Technical information
Certificates
Solicite información
ASSEMBLY STEPS DN 16 AT 32
1
![](https://ac-fix.com/wp-content/uploads/2023/01/1-2.jpg)
Cut the pipe as clean and perpendicular as possible to its axis
2
![](https://ac-fix.com/wp-content/uploads/2023/01/2-2.jpg)
It is necessary to calibrate and chamfer the pipe inside in order
not to damage the O-Rings of the fittings. The AC-FIX chamfering tool
chamfers and calibrates the pipe.
3
![](https://ac-fix.com/wp-content/uploads/2023/01/3-3.jpg)
Insert the fitting into the pipe. The pipe must be seen through the
check holes of the sleeve.
4
![](https://ac-fix.com/wp-content/uploads/2023/01/4-1.jpg)
Place the side of the jaw beside the plastic ring and press
Important:
The fittings AC-FIX PRESS-MULTI can be pressed with jaws or inserts type U, H, RF and RFz. For pressing with jaws or inserts type TH, contact our technical department